KOSA Filter · Technical Bulletins
News Center
Field notes, compliance updates and application engineering from KOSA Filter for high-purity 316L stainless steel fluid systems.
Water Treatment Air & HVAC Filtration: a practical selection guide
Water treatment engineers routinely specify air filtration for critical infrastructure where 0.3 micron particle removal, 1200 Pa maximum pressure drop at rated airflow, …
Specifying dust & flue-gas filtration in water-treatment duty: a field checklist
Water treatment engineers routinely face 120°C flue-gas streams with 85 mg/Nm³ particulate loading and 99.97% required removal efficiency for sub-2.5 micron dust. These c…
Specifying liquid filtration in water-treatment duty: a field checklist
Water treatment engineers selecting filtration for municipal reuse or industrial process water face hard constraints: flow rates up to 45 m³/h per housing, operating pres…
Specifying exhibition & application review in laboratory duty: a field checklist
At 45 m³/h flow, 2.5 bar differential pressure, and 0.1 micron retention target, laboratory engineers routinely face specification drift when translating booth discussion…
Air & HVAC Filtration in Laboratory & R&D: five decisions that set the outcome
For laboratory applications requiring reproducible high-purity results, airflow stability at 1200 m³/h, pressure drop control within ±15 Pa across 72 hours of continuous …
Specifying dust & flue-gas filtration in laboratory duty: a field checklist
For laboratory and R&D engineers requiring reproducible, high-purity results in flue-gas sampling and particulate mass concentration analysis, filtration integrity be…
What brewing engineers get wrong about liquid filtration
Flavour stability in brewing hinges on consistent, hygienic flow at 45 m³/h throughput, 2.5 bar differential pressure, and 0.1 micron particulate retention. These paramet…
Exhibition Notes for Chemical & Petrochemical: a faster route from duty data to a specification
At 45 m³/h flow, 2.5 bar differential pressure, and 0.1 micron particulate retention, chemical engineers routinely encounter duty envelopes where stainless steel integrit…
Chemical Air & HVAC Filtration: a practical selection guide
Chemical engineers selecting air filtration for corrosive process exhaust or cleanroom HVAC must reconcile three non-negotiable constraints: 0.3 micron particle capture e…
Specifying dust & flue-gas filtration in chemical duty: a field checklist
Chemical engineers routinely face dust-laden flue gas streams at 280 °C, with particulate loads up to 12 g/m³ and HCl concentrations exceeding 450 ppm. These conditions d…
Chemical Liquid Filtration Systems for KOSA Filter: purity and throughput with 316L stainless steel
As a process engineer with nearly two decades at KOSA Filter, I've seen firsthand the critical role that corrosion resistance and fugitive-emission control play in chemic…
LIQUID FILTRATIONSpecifying exhibition & application review in cosmetics duty: a field checklist
For cosmetics applications requiring 0.22 micron absolute retention, flow rates up to 45 m³/h, and pressure differentials not exceeding 2.5 bar, the Exhibition & Appl…
Need a tailored quote?
Talk to KOSA Filter application engineers about your 316L stainless steel line.