Membrane pleated filter cartridges(2)
Membrane Pleated Filter Cartridge delivers high efficiency and consistent filtration of fluids in a wide range of critical applications .They are constructed of pleated melt blown filter media that provides removal of particles from 0.1 to 50 µm, The high surface area ensure long service life and low initial pressure drops. All cartridge hardware components are high purity polypropylene materials for use in critical process applications. These cartridges are manufactured and assembled in a clean room environment to minimize the possibility of contamination . They are available in a wide range of configurations to fit most commercially available filter housingsINTRODUCTION:
n Full range of removal ratings
n Graded pore density for high dirt holding capacity
n FDA compliance materials
Specifications
|
Filter Material |
Polypropylene/ Nylon 66/Polystyrene PES |
|
Length |
5/10/20/30/40 inch |
|
Diameter |
Outside :/69mm; Inner Diameter: 28mm |
|
Fineness rating |
0.22/0.45/1/3/5/10/20/50micron |
|
Inner core material |
Polypropylene/ABS |
|
Adapter |
Both side DOE with gasket/Double O-ring-adapter 222 and end cap Double O-ring-adapter 226 O-ring-adapter 226 and end cap |
|
Sealing |
NBR/Silicon/EPDM/Viton |
|
Max temperature |
80°C |
|
Max operating pressure |
4bar/21°C, 2.4 bar/80°C |
Applications
■ Pharmaceutics
n Food & beverage
n Oil & Gas
n Microelectronics
n Chemical industry
n Paints & Coatings
n Plating solutions
n Cosmetic
NXT : Next: Vertical Open Multi-bag Housing
PRE : Previous: Yarn wound string filter cartridges